Pro Tips on How to Pressure Wash a Driveway

Your driveway is exposed to a variety of substances that makes it look dirty and dingy, such as oil, salt, gas, and grease. Every homeowner at some point is going to have to clean their driveways to restore it to the pristine condition it was once in. The best way to clean your driveway is by pressure washing. But the next question arises, how to pressure wash a driveway?

Relax! No worries, here in this blog we share the simplest way to clean your driveway. Follow the step given below to get instant results.

pressure washer service

Professional Tips on How to Pressure Wash A Driveway

Step 1: Prepare driveway and nearby area

Before you learn how to pressure wash a driveway you need to do a proper cleaning. So, first clean all the dirt and debris on the concrete using a large push broom. In case your driveway is closer to the walls, doors or anything that can be damaged by the debris, cover it up. You can use traps and painter’s tape. The traps should protect the finish. 

Step 2: De-grease your driveway surface

The next step is to de-grease the concrete surface. De-greasing breaks the stubborn stains on the driveway. There are some pressure washers available in the market that come with an attachment tool that you can use to decrease. If not, you’ll need to scrub the concrete with a push broom or a stiff brush. 

Step 3: Prepare pressure washer

Once you have decreased your driveway, prepare your pressure washer. Make sure you are aware of how to use, if not sure you can always consult your owner’s manual if you’re unsure. Then attach the spray wand to the pressure washer with a pressure hose. The water supply will come from your garden hose. 

There are various types of pressure washer available in the market. Each model of a pressure washer is different, so always follow the instructions in the manual. 

Step 4: Clean concrete using the detergent solution

As you load the pressure washer with detergent, put on all your safety gear. Such as rubber gloves, eye protection and rubber boots to protect yourself from any debris and detergent. Start the process with the highest end so the water flows down the driveway. 

Additionally, make sure you point the sprayer wand at a low setting at the concrete surface, and sweep back and forth with the detergent. Be sure to overlap each stroke of detergent by 5 – 8 inches. Once the driveway is covered, let the detergent sit for 10-25 minutes – don’t let the detergent dry up. 

Step 5: Rinse concrete

Now you need to rinse off the detergent. Now switch the settings to high-pressure and tip and use the rinse mode setting on your washer. Repeat the same pattern that you use to apply the detergent. This will eliminate the detergent and the stains on the driveway. If the driveway has tougher stains, then slowly overlap the sweeps closer together. This will put extra pressure on the stains. 

Step 6: Seal the concrete

Once you’ve applied the sealer, wait 24 hours to use the driveway. For a more in-depth look at sealing your driveway, view our how-to project. Once your driveway is dried off, seal the driveway to deter any future stains. You can apply a concrete sealer using an extended paint roller and follow the directions given on the sealer. 

Related Article: 3 Methods on: How to Clean Driveways

That’s it! This was the best and proven method on how to pressure wash a driveway. For more on a DIY project or professional driveway cleaning services in Mabank and nearby area, contact professional at Extreme Total Cleaning Services. We have years of experience in this business and strive hard at every project to deliver the top-level of cleaning services. For booking and FREE quotes, you can call us at 903-456-4532

You can also follow us on Facebook for regular updates.